RFC Coax Crimp Tool For RG-58, 59, 62, 140, 174, RG-8X, LMR-195, LMR-240

Description

Thank you for visiting our store.
Did you ever buy a crimp tool and then later become disappointed with the purchase?
I have. I’ve bought crimp tools with the die sizes
“printed”
with ink on the metal and in only a short time the print vanished leaving me to guess the cavity size.
This can’t happen with this quality tool as the die sizes are
cast deeply into the metal for a lifetime of service
.
Did you ever begin the crimp sequence and then realize you were not actually fully prepared, and needed to stop before full pressure was applied; only to realize you must complete the crimp cycle to release the ratchet mechanism?
This tool is forgiving! It has a release lever to interrupt the crimp cycle and release the connector. How clever! Some more expensive tools don’t offer this feature.
Your purchase is for one (1)
RFC 63-DL-801G
Coax Cable Crimp Tool for a variety of coax cable sizes including
RG-58, RG-141, RG-59, RG-62, RG-140, RG-174, RG-8X (Mini-8), LMR-195, LMR-240
and also some Fiber Optic cables.
This
p
rofessional quality ratchet crimp tool, using a 6 in 1 die ranging in sizes of
.049, .068, .100, .137, .213 and .255
inches, places precise pressures (adjustable) for a perfect crimp every time.
Want to expand Your crimp size capabilities with this tool?
For a better value,
we
have a special listing for our crimp tool with a 2nd die for a
substantial savings. This special includes the 2 most popular crimp dies
allowing crimping of the most popular coax sizes used in radio
communications. Please see
EBAY ITEM NUMBER
113762415682
Already have a tool body and wondering if this die will
fit it? Chances are good it may. I have found it fits similar tool
bodies made by IDEAL & PALADIN, GREENLEE, and I’m sure quite a large number of others.
Here are the dimensions for this die which will allow you to compare for fitment of your tool body:
Die Length: 1-1/2- inch (38.1-mm)
Die Height: 15/16-inch (23.8-mm)
Die Width: 7/64-inch (5.55-mm) (inside width of tool cavity)
Die Width: 7/16-Inch (11.11-mm) (overall width of Die)
Die Hole Distance: 15/16-inch (23.8-mm) (center to center)
RF Connector fitment by crimping is the preferred method of attachment by many manufacturing companies and individuals due to the
quickness, quality and low cost of attachment. Expensive solder and soldering equipment may be unnecessary with crimping.
Additionally, the new low loss coax cables such as the LMR se
ries
and others use gas-injected polyethylene dielectric (foam) which is very sensitive to heat.
Overheat the foam when soldering and it turns into a brown, tarry substance, distorting the cable shape, changing the characteristic impedance of the cable, which negatively effects transmission/reception. This dielectric distortion occurs mainly when attempting to solder the coax braid at the 4-holes in the body of a PL-259 connector, especially if the connector body is nickel plated.
Quality connector fitment with no distortion of the coax can be quick and sure with this quality tool and quality connectors.
There is no substitute for quality!
Please see our other listings for quality crimp connectors in UHF, N, Minu-UHF, BNC and TNC types.
Shipping:
FREE
with 2-3 day delivery time.
No international shipping
Email with questions.